
Features
- Automatic calibration set-up ensures accuracy.
- High-precision parts with no visible joint lines.
- Carbon fiber reinforced recoater system ensures non-deformation across 1400 mm length.
- Granite recoater frame enhances stability.
- Open design for freedom of materials and software choice.

Technical Data*
Build Envelope Capacity |
55.1 x 27.6 x 19.7 in (1400 × 700 × 500 mm) |
Maximum Part Weight |
396.8 lb (180 kg) |
AccuracyAccuracy may vary depending on parameters, part geometry and size, pre-processing or post-processing methods, materials and environment. |
L < 100 mm: ±0.2mm L≥100 mm: ±0.2% x L |
Beam Size |
Nominal 0.12-0.9 mm |
Layer Thickness |
0.1-0.25 mm |
Weight |
2840 kg(with 940 kg initial fill inside) |
Machine Size (WxDxH) |
2882 × 1952 × 2395 mm |
Laser |
Solid-state frequency tripled Nd: YVO₄ |
Wavelength |
355 nm |
Controller |
UnionTech™ RSCON |
Part Preparation |
Materialise Magics |
Operating Systems |
Windows 7, Windows 10* |
Input Data File Format |
STL |
Network Type and Protocol |
Ethernet, IEEE 802.3 using TCP/IP and NFS |
Electrical Requirements |
200 – 240 VAC, 50/60 Hz, single phase |
Laser Warranty |
18 months |
Recoater Frame |
Granite |
Systems Control |
Closed loop |
Power (nominal) |
At head 1500 mW (Typically 800mW on the target surface of the material under nominal optical path condition) |
Operating Environment |
|
Temperature Range | 72–79 °F (22–26 °C) |
Maximum Change Rate | 1 °C/hour |
Relative Humidity | < 40 % non-condensing |
Accessories |
|
Additional Resin Vat | Optional |
Processing and Finishing | Post-Curing Unit (optional) |
System Warranty | One-year warranty (under UnionTech’s Purchase Terms and Conditions) |
* Specifications are subject to change; consult with your sales representative for confirmation of current offering.